CDCS New Study Plan | CDCS Latest Study Materials

Are you still distressed that you are young learner of CDCS exam prep? From now on, TrainingQuiz will solve all your worries about the CDCS test. The textbooks of CDCS test questions contain different perspective materials. Even if you are young learners, you can master CDCS Test Questions easily. Having it, you will have the key to pass CDCS exam and will have unprecedented confidence. So what are you waiting for?

We have 24/7 Service Online Support services. If you have any questions about our CDCS guide torrent, you can email or contact us online. We provide professional staff Remote Assistance to solve any problems you may encounter. You will enjoy the targeted services, the patient attitude, and the sweet voice whenever you use CDCS Exam Torrent. 7*24*365 Day Online Intimate Service of CDCS questions torrent is waiting for you. "Insistently pursuing high quality, everything is for our customers" is our consistent quality principle on our CDCS exam questions.

>> CDCS New Study Plan <<

EXIN CDCS Latest Study Materials, CDCS Test Guide

As you all know that practicing with the wrong preparation material will waste your valuable money and many precious study hours. So you need to choose the most proper and verified preparation material with caution. Preparation material for the EXIN EPI Certified Data Centre Specialist (CDCS) exam questions from TrainingQuiz helps to break down the most difficult concepts into easy-to-understand examples. Also, you will find that all the included questions are based on the last and updated CDCS Exam Dumps version. We are sure that using CDCS Exam Questions preparation material will support you in passing the CDCS exam with confidence.

EXIN EPI Certified Data Centre Specialist Sample Questions (Q27-Q32):

NEW QUESTION # 27
When shielding material reaches its saturation point, what will be the impact?

A. The shielding material will reach its optimal shielding performance state.
B. The shielding material will increase its permeability factor.
C. The shielding material will reach its maximum electrically charged state.
D. The shielding material will no longer be able to attenuate (reduce) additional EMF.

Answer: D

Explanation:
When shielding material reaches its saturation point, it can no longer effectively attenuate additional EMF. At saturation, the material's ability to absorb or redirect magnetic fields is exhausted, meaning it cannot provide further shielding beyond this point. Additional EMF exposure would pass through the material without significant reduction.
Detailed Explanation:
Saturation occurs when the material's magnetic domains are fully aligned with the magnetic field, leaving no capacity to absorb or deflect further EMF. This can happen with high EMF levels, beyond the material's design limits, resulting in a breakdown of shielding effectiveness.
EPI Data Center Specialist References:
EPI guidelines on EMF management indicate that selecting appropriate shielding materials with sufficient capacity is essential to prevent saturation and ensure continuous protection. Saturation limits should be considered during design to avoid compromised shielding performance.

NEW QUESTION # 28
The 'maximum exposed area' of the fire-rated glass is defined by the supplier as 3 sqm/32 sqft. The window area is 4 sqm/43 sqft.
What would be the best option?

A. Do not use fire-rated glass due to the size limit and replace it with normal glass.
B. Split the window in two equal parts using an aluminum frame.
C. Split the window into parts smaller than specified as the maximum exposed area and ensure fire-rated frames are used.
D. Split the window in two equal parts fitted together with transparent silicon glue.

Answer: C

Explanation:
When the window area exceeds the maximum exposed area specified for fire-rated glass, it is necessary to split the window into sections that comply with the fire rating requirements. This means creating smaller sections that are each within the 3 sqm/32 sqft limit and using fire-rated frames to ensure that the entire assembly meets fire safety standards. This approach maintains the fire-rated integrity of the glass, while allowing for larger window areas.
Detailed Explanation:
Fire-rated glass is designed to contain fire and prevent it from spreading. If the window exceeds the maximum exposed area defined by the supplier, the integrity of the fire-rated glass could be compromised. By dividing the window into compliant sections with fire-rated frames, you ensure that each pane performs as intended in the event of a fire. Fire-rated frames help maintain the fire resistance across the entire assembly, making this option the best for safety and compliance.
EPI Data Center Specialist References:
EPI recommends adhering strictly to fire safety standards, especially when using materials like fire-rated glass. The guidelines emphasize that modifications should always respect the manufacturer's specifications to ensure the system remains effective in containing and preventing the spread of fire.

NEW QUESTION # 29
You are working on the design of a new facility. The electrical riser of the building with high current power is located close to the area where sensitive IT equipment in the computer room will be located.
What should you recommend to reduce the amount of EMF coming from the electrical riser?

A. Install three-phase power cabling based on a combined cable (e.g. XLPE etc.)
B. Install bus bar trunking
C. Install three-phase power cabling based on three individual core wires
D. Install single-phase power cabling

Answer: A

Explanation:
To reduce Electromagnetic Fields (EMF) emanating from the electrical riser near sensitive IT equipment, three-phase power cabling in a combined cable (such as XLPE) is effective. Combined cabling helps reduce EMF by keeping the conductors tightly packed, which minimizes magnetic fields generated by current flow. Cables like XLPE (cross-linked polyethylene) also offer better insulation, which helps mitigate EMF interference with nearby IT equipment.
Detailed Explanation:
Using a combined three-phase cable reduces EMF because the magnetic fields generated by each phase tend to cancel each other out when in close proximity. This arrangement helps reduce the overall magnetic field strength. In addition, XLPE and similar materials provide good insulation, making them a preferred choice for reducing EMF emissions around sensitive equipment.
EPI Data Center Specialist References:
EPI data center best practices recommend mitigating EMF interference through combined cabling arrangements, especially near areas where sensitive IT equipment is located. Reducing EMF is crucial to maintaining equipment reliability and ensuring compliance with safety standards.

NEW QUESTION # 30
The noise levels in the data center are approximately 91 dB (A).
Do employers need to take precautions?

A. There are no regulations regarding noise levels inside a building. Regulations only apply to noise pollution outside of the building.
B. Yes, since it is mandated by regulations.
C. As long as the data is compliant to ISO/IEC 27001 it is acceptable.
D. No, anything less than 100 dB (A) is acceptable.

Answer: B

Explanation:
In a data center with noise levels of 91 dB (A), employers are indeed required to take precautions to protect personnel, as this level exceeds commonly accepted safety thresholds for occupational noise exposure. Regulations, such as those from the Occupational Safety and Health Administration (OSHA) or similar agencies, mandate specific controls and protections for environments with high noise levels.
Detailed Explanation:
Noise levels above 85 dB (A) typically trigger requirements for hearing conservation programs. At 91 dB (A), steps like providing ear protection, conducting regular noise assessments, and possibly implementing engineering controls to reduce noise should be taken. Extended exposure to such levels can lead to hearing loss, so regulatory compliance ensures both immediate and long-term protection for personnel.
EPI Data Center Specialist References:
EPI guidelines for data center safety address noise exposure as part of the environmental safety measures. EPI recommends adhering to local occupational health regulations, as excessive noise can harm personnel and affect operational efficiency due to potential health hazards.

NEW QUESTION # 31
When designing a data center network, your company wants to minimize the number of network switches to manage.
What type of physical cabling layout would be the best choice?

A. It does not matter as the number of switches is not influenced by the physical cabling layout
B. EoR (End of Row) design
C. Star network design using coaxial cables
D. ToR (Top of Rack) design

Answer: B

Explanation:
An End of Row (EoR) design minimizes the number of network switches, as multiple racks can share a single switch at the end of a row, reducing switch counts and simplifying management. This design centralizes network switching to fewer points, which reduces the complexity and number of switches required compared to a Top of Rack (ToR) design, where each rack typically has its own switch.
Detailed Explanation:
In EoR designs, each row has a single network switch that handles the connections for all racks within that row. This reduces the number of individual switches needed and centralizes network management, which is ideal for minimizing equipment and simplifying infrastructure in the data center.
EPI Data Center Specialist References:
EPI promotes the EoR design as a way to reduce switch counts and streamline management in data centers. This configuration allows for easier scaling and maintenance while maintaining efficient network connectivity.

NEW QUESTION # 32
......

Some of our customers are white-collar workers with no time to waste, and need a EXIN certification urgently to get their promotions, meanwhile the other customers might aim at improving their skills. Our reliable CDCS question dumps are developed by our experts who have rich experience in the fields. Constant updating of the CDCS Prep Guide keeps the high accuracy of exam questions thus will help you get use the CDCS exam quickly. During the exam, you would be familiar with the questions, which you have practiced in our CDCS question dumps. That’s the reason why most of our customers always pass exam easily.

CDCS Latest Study Materials: https://www.trainingquiz.com/CDCS-practice-quiz.html

Besides, CDCS exam materials are compiled by skilled professionals, therefore quality can be guaranteed, EXIN CDCS New Study Plan If your visit or use of this website, it means that you accept these terms and conditions and acknowledge that these terms and conditions can work as a binding agreement between you and the Company, EXIN CDCS New Study Plan I need an activation key.

Administrative Services contains all necessary CDCS Test Guide functionality for the store worker to do her job, A catalog of known bridge designs captures the current state of the art and CDCS New Study Plan frees bridge designers to concentrate on evolving and optimizing for new technology.

100% Pass EXIN - High Pass-Rate CDCS New Study Plan

Besides, CDCS Exam Materials are compiled by skilled professionals, therefore quality can be guaranteed, If your visit or use of this website, it means that you accept these terms and conditions and acknowledge CDCS that these terms and conditions can work as a binding agreement between you and the Company.

I need an activation key, Our CDCS exam preparatory with high quality and passing rate can bolster hour confidence to pass the exam more easily, We have business in providing valid and high-quality products since 2010.

Ted Walker Ted Walker

Biography

CDCS New Study Plan | CDCS Latest Study Materials

EXIN CDCS Latest Study Materials, CDCS Test Guide

EXIN EPI Certified Data Centre Specialist Sample Questions (Q27-Q32):

100% Pass EXIN - High Pass-Rate CDCS New Study Plan

Quick Link

Link

Demo